Каталог промышленного оборудования

Каталог оборудования R. STAHL

Каталог оборудования MTL Instruments

Каталог оборудования TRANBERG

Кабельные проходки BST

Каталог светильников SCHUCH.

Control Panels 

TEF_4720

Navigation lights control panel for the TEF 2840/TEF 2870 Lanterns.
Main supply 24V AC/DC
TEF 4720

  • For console mounting
  • Easy installation (all terminals are separated from control box with a 1 meter flexible conduit)
  • Prepared for connection of two 24 V AC/DC power supplies
  • Automatic selection of power supply, with preference on main supply
  • Alarm when a supply is missing
  • The lanterns are switched by two pole, rocker switches on the front panel.
  • Dimmable LED’s indicate when a lantern is on
  • Visible and audible alarm when a fault occurs in a circuit (broken bulb, short circuit etc.)
  • Voltage drop in long cable length can be a problem. This is compensated by connecting specific circuits to a higher voltage than 24V.
  • Transformers delivered by Tranberg AS have output for six different voltages
  • Tranberg AS can assist calculating  voltage loss in cable to lantern.
  • Equipped with an ”alarm-relay” with potential free contact set for remote monitoring
  • Test button for testing of LED’s  and acoustic alarm.
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |

TEF_4722

Lantern control panel for TEF 2850 lanterns.
230 (115) volt system
TEF 4722

  • Engraved text specified by customer. Front plate is easily exchengeable
  • Easy installation. The terminals are separated from the control box by a 1-meter flexible conduit. (Flush mounting version only)
  • Automatic power supply selector, with priority on main supply. Alarm when a supply is missing
  • Acoustic and visible alarm when failure in lantern circuit.
  • Potential free contact set for remote monitoring of alarms
  • Test button for indicator LED's and alarm circuit
  • Two pole switches
  • Dimmable indicator LED's
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    | 

TEF_4730

Navigation lights control panel for TEF 2840/TEF 2870.
24V power supply
TEF 4730

  • For console mounting
  • Easy installation: ( all terminals are separated from control box with a 1 meter flexible conduit )
  • Prepared for connection of two 24V AC/DC power supplies
  • Automatic selection of power supply, with preference on main supply
  • Alarm when a supply is missing
  • The lanterns are switched by two pole, three position rocker switches ont the front panel. Left position for main lantern, middle position off and right position for reserve lantern
  • Dimmable LED’s indicate when a lantern in on
  • Visible and audible alarm when a fault occurs in a circuit
  • ( broken bulb, short circuit etc. )
  • Voltage drop in long cable length can be a problem. This is compensated by connecting specific circuits to a higher voltage than 24V
  • Transformers delivered by Tranberg AS have output for six different voltages
  • Tranberg AS can assist calculating voltage loss in cable to lantern
  • Equipped with an “alarm-relay” with potential free contact set for remote monitoring
  • Test button for testing of LED’s and acoustic alarm
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_4732

Navigation lights control panel, for TEF 2850 lanterns.
2x 230 (115) volt system
TEF 4732

  • Engraved text specified by customer. Front plate is easily exchengeable
  • Easy installation. The terminals are separated from the control box by a 1-meter flexible conduit. (Flush mounting version only)
  • Automatic power supply selector, with priority on main supply. Alarm when a supply is missing
  • Acoustic and visible alarm when failure in lantern circuit.
  • Potential free contact set for remote monitoring of alarms
  • Test button for indicator LED's and alarm circuit
  • Two pole switches
  • Dimmable indicator LED's
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_4740_

Signal Lights Control Panel 230 (115)V system
TEF 4740

  • Engraved text and mimic specified  by customer.
  • Easy installation. The terminals are separated from the control box by a 1 meter flexible conduit. (Flush mounting version only)
  • For one or two power supplies. When two supplies are used –Automatic power supply selector, with priority on main supply. Alarm when a supply is missing
  • Acoustic and visible alarm when failure in lantern circuit
  • Potential free contact set for remote monitoring of alarms
  • Test button for indicator LED’s and alarm circuit
  • Two pole switches
  • Dimmable indicator LED’s
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_2610

Searchlight Control Panel for Searchlight TEF 2620 and TEF 2630.
Bridge- and direct operated
TEF 2610

  • For flush mounting
  • For control of one search light.

  • Compact size
  • Large switches for easy and secure operation
  • Easy installation.

  • Other colours on request
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_2612

Searchlight Control Panel. Commander series. 
For Searchlight TEF 2650 Halogen/Xenon.
TEF 2612

TEF 2612 is a new type of control panel for searchlights. With this panel you can control one searchlight. Up to 8 panels can be connected to the network. This type of panel can only be used together with searchlights which is adapted to this kind of technology. The searchlights and the control panels are connected to a common RS-485 network, which reduce the wiring on the vessel to a minimum.

  • Compact size
  • Dimmable backlighting
  • Large pushbuttons for easy and secure operation
  • Easy installation.
  • Operated at a safe 24VDC.
  • Operates one searchlight
  • “Home” function
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_2613_EN

Searchlight Control Panel. Commander series. 
For Searchlight TEF 2650 Halogen/Xenon.
TEF 2613

TEF 2613 is a new type of control panel for searchlights. With one panel you can control up to 8 searchlights. This means that the need of space on the brigde desk  is considerably reduced, but still the user-friendliness is high. This type of panel can only be used together with searchlights which is adapted to this kind of technology. The searchlights and the control panels are connected to a common RS-485 network, which reduce the wiring on the vessel to a minimum.

  • Compact size
  • Dimable backlighting
  • Large push buttons for easy and secure operatinon
  • Easy installation.
  • Operated at a safe 24VDC.
  • Up to 8 searchlight control panels can be connected on the same network.
  • Automatically detects the number of searchlights and panels; Can therefore be expanded at any time.
  • "Home" function
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_2614

Searchlight Control Panel. Commander series. 
For Searchlight TEF 2650 Halogen/Xenon.
TEF 2614

TEF 2614 is a new type of control panel for searchlights. With one panel you can control up to 4 searchlights. This means that the need of space on the brigde desk  is considerably reduced, but still the user-friendliness is high. This type of panel can only be used together with searchlights which is adapted to this kind of technology. The searchlights and the control panels are connected to a common RS-485 network, which reduce the wiring on the vessel to a minimum.

 

  • Compact size
  • Dimmable backlighting
  • Large push buttons for easy and secure operation
  • Easy installation.
  • Operated at a safe 24VDC.
  • Up to 8 searchlight control panels can be connected on the same network.
  • Automatically detects the number of searchlights and panels: Can therefore be
  • expanded at any time. (Max 4 searchlights)
  • “Home” function
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  

TEF_4614

Control panel for Trawler - and Purse Seiner Signals
TEF 4614

  • Easy installation
  • Solid State flash circuits
  • Control unit seperated from power unit. Length of control cable is optional. Standard length is 2 meters
  • Layout adapted to Tranberg’s lantern control panels
  • Dimmable indicator lights


  • Two set of output terminals
  • Front plate with measures 192 x 96 mm. For adapting to Tranberg’s lantern control panel with 192 mm with
  • Optional length of control cable
Acrobat_Reader_ico_    Data sheet (Acrobat Reader PDF files)     |     English     |    Russian    |  
Проверить тИЦ и PR